Products

Yb fiber amplifier

Wavelength Coverage 177 - 5000nm

P R O D U C T S

Yb fiber amplifier

Based on ytterbium-doped fiber amplification technology, it amplifies single-frequency or non-single-frequency input lasers within the 976-1134 nm range, achieving a maximum output of 200 W while ensuring extremely low intensity noise and phase noise in the output laser. It features high power, low-noise amplification, and ultra-fast seed laser shutdown protection.

Features
  • Ultra-Stable Output Power
  • Excellent Beam Quality
  • Seed Power-off Protection System
  • Low Noise
Application
  • Continuous Mid-Infrared Optical Parametric Oscillator
  • Pump Source
  • Optical Lattice
  • Optical Trap
  • Interferometry
  • Holographic Imaging

Main parameters

Specification

Partnumber

FA-SF-X-Y-CW(1)

Wavelength Range

976-978nm

1012-1020nm

1020-1080nm

1080-1095nm

1095-1110nm

1110-1134nm

Output Power

>2W/8W

>2W/10W/30W/50W/100W

>2W/10W/30W/50W/100W/130W/180W 

>2W/10W/30W/50W/100W

>2W/10W/30W

>2W/5W/10W

Typical Wavelength

977nm, 1012nm, 1064nm, 1112nm

Bandwidth

>±2nm 

>±2nm 

>±10nm 

>±5nm 

>±5nm 

>±2nm 

Relative Intensity Noise

<0.03% (RMS, 10Hz-10MHz Integration)

Power Stability

<0.75% @3hours, RMS

Power Tuning Range

1-100%

Output Mode

Single Mode PM fiber,FC/APC Connector(Output Power≤2W)      OR      Collimated Output(All Power)

Beam Diameter(3)

0.6±0.2mm(Output Power≤30W),  1.7±0.2mm(Output Power>30W)

Pointing Stability

<±2μrad/℃

Beam Quality

TEM00,M²<1.1

Polarization

Linear, >23dB

Seed Laser Input Power

≥10mW(2),Single Mode PM Fiber,FC/APC Connector

Seed Laser Input Isolation

>25dB

Output Laser Isolation

>25dB

Cooling

Air Cooling(Output Power≤50W)/Water Cooling(All Output Power)

Operating Environment & Power Supply

Temperature

15-30 ℃(Air Cooling)  OR  15-35 ℃(Water Cooling)

Power Supply

100V-240V, AC, 50/60Hz

Communication

RS422

(1)X is the center wavelength,Y is the output power, for 1064nm 50W amplifier, the partnumber is FA-SF-1064-50-CW
(2) Default input power should be 10-50mW, for higher or lower input power, please email us for customization
(3) Beam size for collimated outout,If PM fiber FC/APC connector output,there is no extra collimator
 
定制图标 Higher power, more wavelengths, customizable solutions