P R O D U C T S
460-488nm Laser
Based on single frequency seed laser,low noise fiber amplifier and high efficiency frequency convert technique, Precilasers can provide narrow linewidth 460-488nm CW lasers,features with high frequency stability,long life and good beam quality.
Features
- Narrow Linewidth
- High Power
- High power Stability
- Good Beam Quality
- Never Mod Hop
Application
- Precision Measurement
- Interference Lithography
Main parameters
|
Specification |
|||||
|
Partnumber |
FL-SF-X-Y(1)-CW |
||||
|
Wavelength Range |
460-488nm |
||||
|
Typical Wavelength |
460nm, 480nm, 488nm |
||||
|
Linewidth(2) (100 us integration ) |
<40kHz |
||||
|
Operational Mode |
CW |
||||
|
Output Power |
>50mW |
>1W |
>3W |
>6W |
|
|
Beam Diameter |
1±0.15 mm |
||||
|
Beam Waist Location |
output aperture±0.5m |
||||
|
Beam Divergence (full angle) |
<1mrad |
||||
|
Beam Circularity |
0.9-1.1 |
||||
|
Beam Pointing Stability (PP) |
<15μrad |
<50μrad |
|||
|
Beam Quality |
TEM00,M²<1.3 |
||||
|
Polarization |
Linear, >20dB |
||||
|
Power Stability |
<0.75% @3hours, RMS |
||||
|
Relative Intensity Noise |
<0.2%(RMS, 10Hz-10MHz integration) |
||||
|
Cooling |
Air cooling |
Water cooling |
|||
|
Warm-Up Time |
|||||
|
Cold Start |
<2 hours |
||||
|
Warm Start |
<30 minutes |
||||
|
Demension and Weight |
|||||
|
Controller Size |
≤483mm x 420mm x 133mm (50mW) |
≤483mm x 520mm x 132mm (1W,3W,6W) |
|||
|
Laser Head Size |
≤466mm x 133mm x 52mm(50mW) |
≤253mm x 455mm x 118.5mm (1W,3W,6W) |
|||
|
Chiller Size |
NA |
≤58cm x 29cm x 52cm |
|||
|
Chiller Weight |
≤25kg |
||||
|
Cable Length Between Laser Head And Controller |
>1.5m |
||||
|
Environment and Power Supply |
|||||
|
Operating Temperature(No condensing) |
15-30 ℃(Air cooling) |
15-35 ℃(Water cooling) |
|||
|
Power Supply |
100V-240V, AC, 50/60Hz |
||||
|
Communication |
RS422 |
||||
(1)X indicates laser power,unit in W.For example output power is 1W@460nm: FL-SF-460-1-CW.
(2)Linewidth measured by delayed self-heterodyne