P R O D U C T S
2131nm Narrow linewidth laser
Based on Tm-doped fiber amplifier technique, Precilasers can provide 2131nm amplifier that maxium power of 50W， and keeping very low phase noise and intensity noise.
Features
- High Power
- Low Phase Noise
- Low Intensity Noise
Application
- Quantum Precision Measurement
- Quantum Computation
- Pumping
Main parameters
|
Specification |
|
|
Partnumber |
FA-SF-X-Y-CW(1) |
|
Wavelength |
2131nm |
|
Output Power |
>2W/10W/20W |
|
Bandwidth |
>±5nm |
|
Relative Intensity Noise |
<0.05% (RMS, 10Hz-10MHz Integration) |
|
Power Stability |
<0.75% @3hours, RMS |
|
Power Tuning Range |
1-100% |
|
Output Mode（2） |
Single Mode PM fiber，FC/APC Connector（Output Power≤2W) OR Collimated Output（All Power） |
|
Beam Diameter |
0.6±0.2mm |
|
Beam Quality |
TEM00，M²<1.1 |
|
Polarization |
Linear, >23dB |
|
Seed Laser Input Power |
≥10mW(3) |
|
Seed Laser Input Isolation |
>25dB |
|
Output Laser Isolation |
>25dB |
|
Cooling |
Air Cooling /Water Cooling |
|
Operating Environment & Power Supply |
|
|
Temperature |
15-30 ℃（Air Cooling） OR 15-35 ℃（Water Cooling） |
|
Power Supply |
100V-240V, AC, 50/60Hz |
|
Communication |
RS422 |
(1)X is the center wavelength，Y is the output power, for 2131nm 2W amplifier, the partnumber is FA-SF-2131-2-CW.
(2) Beam size for collimated outout，If PM fiber FC/APC connector output，there is no extra collimator
(3) Default input power should be 10-50mW, for higher or lower input power, please email us for customization
Higher power, more wavelengths, customizable solutions
