P R O D U C T S
1064nm Narrow linewidth laser
Based on Ytterbium-doped fiber amplifier technique, Precilasers can provide 1064nm high power and low noise amplifier.
Features
- Low intensity noise
- Low phase noise
- Good beam quality
Application
- Laser Pumping
- Optical Lattice
- Optical Trap
Main parameters
|
Specification |
|
|
Partnumber |
FA-SF-X-Y-CW(1) |
|
Wavelength |
1064nm |
|
Output Power |
＞2W/10W/30W/50W/100W/130W/180W |
|
Bandwidth |
＞±10nm |
|
Relative Intensity Noise |
<0.03% (RMS, 10Hz-10MHz Integration) |
|
Power Stability |
<0.75% @3hours, RMS |
|
Power Tuning Range |
1-100% |
|
Output Mode |
Single Mode PM fiber，FC/APC Connector（Output Power≤2W) OR Collimated Output（All Power） |
|
Beam Diameter（3） |
0.6±0.2mm(Output Power≤30W)， 1.7±0.2mm(Output Power>30W) |
|
Pointing Stability |
<±2μrad/℃ |
|
Beam Quality |
TEM00，M²<1.1 |
|
Polarization |
Linear, >23dB |
|
Seed Laser Input Power |
≥10mW(2)，Single Mode PM Fiber，FC/APC Connector |
|
Seed Laser Input Isolation |
>25dB |
|
Output Laser Isolation |
>25dB |
|
Cooling |
Air Cooling(Output Power≤50W)/Water Cooling（All Output Power） |
|
Operating Environment & Power Supply |
|
|
Temperature |
15-30 ℃（Air Cooling） OR 15-35 ℃（Water Cooling） |
|
Power Supply |
100V-240V, AC, 50/60Hz |
|
Communication |
RS422 |
(1)X is the center wavelength，Y is the output power, for 1064nm 50W amplifier, the partnumber is FA-SF-1064-50-CW
(2) Default input power should be 10-50mW, for higher or lower input power, please email us for customization
(3) Beam size for collimated outout，If PM fiber FC/APC connector output，there is no extra collimator
Higher power, more wavelengths, customizable solutions
